(updated: 05/08/2015)
Technical Regulations:
Modified
Class
IFMAR
ISTC 1/10 EP Touring Car will be used for this event.
1.
Body shell Appearance
1.1
- Cars must be 1/10th scale Touring Car 4 doors, which are available on the
market.
1.2
- No part of the chassis, including wheels/tires/motor/battery or electronic
equipment may protrude outside the body shell when viewed from above.
1.3
- The standard body wings and spoilers can be used. Optional wings are allowed
as long as they meet the requirements.
1.4
- On the body of the car no extra holes allowed, except the following: antenna
pipe, body mount and transponder, which are not over 10mm in diameter.
1.5
- Dimensions: Maximum width without body 190mm. Maximum width with body 200mm.
Maximum wheelbase 273mm. Minimum Roof height 115mm Maximum Wing height 115mm.
No Minimum ride height
2. Chassis and Drive Train - Only four (4) wheel drive
transmission type is allowed for this event.
3. Weight - The weight of the car, ready to race including
timing equipment (transponder) at any time of the race shall not be lower than:
Minimum weight 1,350g
4. Wing - See IFMAR ISTC 1/10th Touring Car Regulation for
Wing and side Dams dimensions.
5. Batteries
Approval
5.1 -
Battery Max. 6 cells 7.2v Sub-C NiCad, NiMH or Lipo 2 cells 7.4v Hard Case.
5.2
- Batteries must be readily available in the market and have a recognizable
brand name.
5.3
- Battery aids for servo can be installed, but may not assist the drive system
in any way.
5.4 - LiPo drive batteries MUST be
charged in a closed ‘LiPo Safety Bag’ at all times.
6. Tires: Sweep EXP-36R2PS
7. Motor: Any motor from any brand available on the market
is ALLOWED.
IFMAR
ISTC 1/10 EP Touring Car will be used for this event.
1.
Body shell Appearance:
1.1
- Cars must be 1/10th scale Touring Car 4 doors, which are available on the
market.
1.2
- No part of the chassis, including wheels/tires/motor/battery or electronic
equipment may protrude outside the body shell limits when viewed from above.
1.3
- The standard body wings and spoilers can be used. Optional wings are allowed
as long as they meet the requirements.
1.4
- On the body of the car no extra holes allowed, except the following: antenna
pipe, body mount and transponder, which are not over 10mm in diameter.
1.5
- Dimensions: Maximum width without body 190mm. Maximum width with body 200mm.
Maximum wheelbase 273mm. Minimum Roof height 115mm Maximum Wing height 115mm.
No
Minimum ride height
2.
Chassis and Drive Train - Only four (4) wheel drive transmission type is
allowed for this event.
3.
Weight - The weight of the car, ready to race including timing equipment
(transponder) at any time of the race shall not be lower than: Minimum weight
1,350g
4.
Wing - See IFMAR ISTC 1/10th Touring Car Regulation for Wing and side Dams
dimensions.
5.
Batteries Approval
5.1
- Battery Max. 6 cells 7.2v Sub-C NiCad, NiMH or Lipo 2 cells 7.4v Hard Case.
5.2
- Batteries must be readily available in the market and have a recognizable
brand name.
5.3
- Battery aids for servo can be installed, but may not assist the drive system
in any way.
5.4 - LiPo
drive batteries MUST be charged in a closed ‘LiPo Safety Bag’ at all times.
6. Motors:
Any 13.5T motor from any brand available on the market is ALLOWED
7. Tires: Sweep
EXP-36R2PS
8. Works
Drivers are NOT allowed in this class
TRF Challenge
Only Tamiya 4WD Chassis is
allowed
1.
Body shell Appearance:
1.1
- Cars must be 1/10th scale Touring Car 4 doors, which are available on the
market.
1.2
- No part of the chassis, including wheels/tires/motor/battery or electronic
equipment may protrude outside the body shell limits when viewed from above.
1.3
- The standard body wings and spoilers can be used. Optional wings are allowed
as long as they meet the requirements.
1.4
- On the body of the car no extra holes allowed, except the following: antenna
pipe, body mount and transponder, which are not over 10mm in diameter.
1.5
- Dimensions: Maximum width without body 190mm. Maximum width with body 200mm.
Maximum wheelbase 273mm. Minimum Roof height 115mm Maximum Wing height 115mm.
No
Minimum ride height
2.
Chassis and Drive Train - Only four (4) wheel drive transmission type is
allowed for this event.
3.
Weight - The weight of the car, ready to race including timing equipment
(transponder) at any time of the race shall not be lower than: Minimum weight
1,350g
4.
Wing - See IFMAR ISTC 1/10th Touring Car Regulation for Wing and side Dams
dimensions.
5.
Batteries Approval
5.1
- Battery Max. 6 cells 7.2v Sub-C NiCad, NiMH or Lipo 2 cells 7.4v Hard Case.
5.2
- Batteries must be readily available in the market and have a recognizable
brand name.
5.3
- Battery aids for servo can be installed, but may not assist the drive system
in any way.
5.4 - LiPo
drive batteries MUST be charged in a closed ‘LiPo Safety Bag’ at all times.
6. Motors:
Any 13.5T motor from any brand available on the market is ALLOWED
7. Tires: Sweep
EXP-36R2PS
8.
Drivers Entry into TRF Challenge will receive a Tamiya Pit Towel.
No comments:
Post a Comment